Geprc Taker F722 Bls 65A V2 Stack

GEPRC TAKER F722 BLS 65A V2 STACK

Features

• Uses the mainstream STM32F722 chip

• Equipped with the latest 42688-P gyroscope

• 16M onboard black box storage

• Integrated LC filter

• Upgraded Type-C USB interface

• Directly plugs into the DJI Air Unit

• Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience

• Simple and efficient installation method with shock absorbers for stable gyroscope performance

Specifications

GEP-F722-HD v2 Flight Controller

• MCU: STM32F722

• IMU: ICM42688-P(SPI)

• Air Unit Connection: Direct plug-in to DJI Air Unit

• Black Box:16M onboard

• USB Interface: Type-C

• Barometer: supported

• OSD: BetaFlight OSD w/ AT7456E chip

• Firmware Target: GEPRCF722

• Dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• Input Voltage: 3-6S LiPo

• UART: 5

• Power Filter: Integrated LC filter

• Weight: 8.1g

TAKER H65_8S_BLS 65A 4IN1 ESC

• Input Voltage: 3-8S Lipo

• Ammeter: Supported

• Continuous Current：65A

• Burst Current：70A（5 seconds）

• Support Protocol: Dshot 150/300/600

• Dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• Weight: 14.9g

• Firmware Target: B_X_30

Includes

• 1 x FC board

• 1 x ESC board

• 1 x Capacitor

• 1 x DJI Air Unit adapter cable

• 1 x Flight controller adapter cable

• 1 x XT60 power cable

• 4 x M3*30 screws

• 4 x M3*25 screws

• 8 x Nylon nuts

• 8 x Silicone anti-shake pads

• 2 x sh1.0 4pin silicone cable

• 1 x Camera connection cable