GEPRC TAKER F405 BLS 65A V2 Stack

Features

• Use mainstream STM32F405 chip

• Equipped with the latest 42688-P gyroscope

• 16M black box storage

• Integrated LC filter

• Upgrade type-C USB interface

• Directly plugged into the DJI Air Unit

• With TAKER H65_8S_BLS 65A 4IN1 ESC, the flying feel is silky

• Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

• 12V@2.5A?+ 5V@3A dual independent BEC

Specifications

GEP-F405-HD V3 Flight Controller

• MCU?STM32F405

• IMU?ICM42688-P(SPI)

• Air Unit Connection?Direct plugging into DJI Air Unit

• Black Box?16M onboard

• Barometer: support

• Motor outputs?M1-M6

• USB Interface?Type-C

• OSD?BetaFlight OSD w/ AT7456E chip

• BEC?5V@3A,12V@2.5A?dual BEC

• Firmware Target?GEPRCF405

• Size?37.15?37.15mm

• Mounting: 30.5?30.5mm??4mm hole becomes ?3mm after using a silicone shock-absorbing circle

• Input Voltage?3-6S LiPo

• UART?6 UARTs

• Power Filter?Integrated LC filter

• Weight?7.3g

TAKER H65_8S_BLS 65A 4IN1 ESC

• Input Voltage: 3-8S Lipo

• Ammeter: Support

• Continue Current?65A

• Burst Current?70A?5 second?

• Support Protocol: Dshot 150/300/600

• Size?42?45.7mm?hole30.5?30.5mm??4mm hole becomes ?3mm after using the silicone shock-absorbing ring.

• Weight: 14.9g

• Target: B_X_30

Includes

1 x Flight Controller

1 x ESC

1 x Capacitor

1 x DJI Air Unit Adapter Cable

1 x Flight Controller Adapter Cable

1 x XT60 Power cable

4 x M3*30 Screws

4 x M3*25 Screws

8 x Nylon nuts

8 x Silicone grommets

2 x sh1.0 4pin silicone cable

1 x Camera connection cable

??????