Blitz ATF435 Stack (E55S 4-IN-1 ESC)

BLITZ ATF435 Stack (E55S 4-IN-1 ESC) FC Specifications MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A Changelog November 6, 2023 : The flight control Gyro was changed from BMI270 to ICM42688. ESC Specifications Mounting Holes: 30.5*30.5mm/Φ4mm Weight: 14.7g Supports 2-6S lipo input MCU: BB21 Constant: 55 Amps Burst: 65 Amps Current sensor: Yes BEC: No Current rate: 200 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay)/Q-H-25 – Bluejay, 0.16, 24kHz Packing List 1 x BLITZ ATF435 Flight Controller 1 x BLITZ E55S 4-IN-1 2-6S ESC 1 x wire harness for ATF435 Flight controller 1 x silicon grommets

BLITZ ATF435 Stack (E55S 4-IN-1 ESC) Specifications

• Weight: 14.7g Supports 2-6S lipo input

pads Smartaudio / IRC Tramp VTX protocol supported The flight control Gyro was changed from BMI270 to ICM42688. ESC (Bluejay)/Q-H-25 – Bluejay, 0.16, 24kHz Packing List 1 x BLITZ ATF435 Flight Controller 1 x BLITZ E55S 4-IN-1 2-6S ESC 1 x wire harness for ATF435 Flight controller 1 x silicon grommets

Good to know

For background on this component category, see what a flight controller does in an FPV stack.

Related part

Also see the GEPRC TAKER F722 SE Flight Controller for another option worth comparing.

FAQ

Is this genuine stock? Yes, sourced and sold directly by UAVStore.

Will this fit my build? Check the specifications above against your existing setup before ordering.

Buy the BLITZ ATF435 Stack (E55S 4-IN-1 ESC) online in India from UAVStore, with fast domestic shipping.