GEPRC TAKER F722 BLS 100A 8S Stack

Feature

1. Use mainstream STM32F722 chip

2. Equipped with the latest 42688-P gyroscope

3. 512M black box storage

4. Support Bluetooth parameter tuning

5. Integrated LC filter

6. Upgrade type-C USB interface

7.With GEP-BL32 50A 96K 4IN1 32Bit ESC, silky flight

8. Directly plugs into the DJI Air Unit

9. Simple and effective installation with shock-absorbing mounts for stable gyroscope performance

10. Integrated Barometer

11. 9V@2.5A + 5V@3A dual independent BEC

Specifications

GEP-F722-BT-HD V3 Flight Controller

• MCU: STM32F722

• IMU: ICM42688-P(SPI)

• Air Unit Connection: Directly plugs into the DJI Air Unit

• Black Box: 512M onboard

• Bluetooth: Supported

• Barometer: Supported

• USB Interface: Type-C

• OSD: BetaFlight OSD w/ AT7456E chip

• BEC: 5V@3A, 9V@2.5A dual BEC

• Firmware Target: GEPRCF722_BT_HD_V3

• Size: 36.9×36.9mm, hole: 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing ring

• Input Voltage: 3-6S LiPo

• UART: 5 groups (UART4 fixed for Bluetooth)

• Power Filter: Integrated LC filter

• Weight: 8.2g

GEP-BL32 50A 96K 4IN1 ESC

• Model: GEP-BL32 50A 96K 4IN1 ESC

• Input Voltage: 3-6S Lipo

• Continue Current: 50A

• Burst Current: 55A (5 second)

• Galvanometer: Support

• Telemetry: Support

• Support Protocol: Dshot 150/300/600

• Size: 42.5×42.1mm，hole30.5×30.5mm

• Weight: 14g

• Target: ST_G0_05 – 31.92

Includes

1 x FC board

1 x ESC board

1 x Capacitor

1 x O3 3-in-1 connection cable

1 x FC adapter cable

1 x sh1.0 4pin silicone cable

1 x Camera connection cable

1 x VTX connection cable

1 x XT60 power cable

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts

12 x Silicone anti-shake pads