Walksnail Avatar HD Kit V2 (Dual Antennas Version)

Walksnail Avatar HD Kit V2 (Dual Antennas Version)

Features:

• Dual antennas

• Compatible 4K

• 1080P 120fps compatibility

• 22ms low latency

• Ranging Mode

• 4KM range

• Light weight design

• FOV160°

• Built-in 32G storage,

• Support Gyroflow

• 6V-25.2V

• The only native 4:3 high-definition sensor in the FPV industry

Bullet Points for Walksnail Avatar HD Kit V2 (Dual Antennas)

• The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.

• Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it's better fit for regular FPV race as well.

• The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.

• The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.

• Updated the design of PCB board and shell, improved the quality of VTX, more durable.

• Optimized the installation place of the antenna, so as to better protect the VTX.

• The position of the frequency binding button has been changed to make the frequency binding operation more convenient.

• A spare pad is added to provide two power connection modes.

• New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability . Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.

• The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.

• It supports both high frame rate and standard frame rate, and it has an average latency of 22ms with the high frame rate.

• Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.

•
Q: Do we support 1080P 120FPS

•
A: Our VTX products all support 1080P/120FPS, and can reach 1080P/120FPS through firmware upgrade is around the corner.

Specification:-

Camera

Model
Avatar V2 camera

Image Sensor
1/3.2-Inch 4Mp 4:3sensor

Resolution
1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;

Ratio
4:3 native /16:9

Lens
2.1mm

FOV
160°

Aperture
F2.0

Shutter
Rolling shutter

Min.Illumination
0.001Lux

Weight
7.2g

Dimensions
19*19*22mm

Coaxial Cable
140mm

Gyroflow
Only 32G VTX Supported

VTX

Model
Avatar V2 module(Dual Antenna)

Communication Frequency
5.725-5.850GHz

Transmitter Power (EIRP)

FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm

1/O Interface
JST1.0*4(Power in)JST0.8*6(USB)

Mounting Holes
25.5*25.5mm; 20*20mm

Dimensions
33.5*33.5*10.5mm

Storage
32G

Recording
1080p/720p

Weight
15.4g

Operating Temperature
-20-40℃

Channels
8

Wide Power Input
6V-25.2V

Supported FC System
Betaflight; Inav; Fettec; ArduPilot; Kiss

OSD
Canvas mode

Latency
Average delay 22ms

Antenna
2(IPEX)

Avatar V2 antenna

Polarization
LHCP

Bandwidth
5600MHz-6000MHz

Gain
1.9dBi

VSWR
≤1.5

Input Impedance
50Ω

Interface
IPEX-1

Size
R15 X 45mm （without cable）

Weight
2g

Packing List

USB cable
X1

4 Pin silicone cable
X1

M2*4mm screws
X8

M2*5mm screws
X4

M2*6mm screws
X4

M2*14mm screws
X4

M2*5*0.5mm gasket
X4