No Ads

Mornsun LM75-22B15 AC/DC 75W Enclosed Switching Power Supply

Product ID: FAERI-02419

Mornsun LM75-22B15 AC/DC 75W Enclosed Switching Power Supply The LM75-22B15 is a 75W AC/DC enclosed SMPS power supply from Mornsun. It has a universal input voltage range of 85-264VAC and an output voltage of 15VDC. The power supply is also equipped with a number of features, including overload…

₹1,707.20

Price excludes GST. +18% GST (₹307.30/unit) is added at checkout. Shipping charged separately — based on the order’s quantity & size.

In stock

  • Cash on Delivery available
  • Ships within 24–48 hours
  • Backed by FAERI maker support
No Ads

Product details

Mornsun LM75-22B15 AC/DC 75W Enclosed Switching Power Supply

The LM75-22B15 is a 75W AC/DC enclosed SMPS power supply from Mornsun. It has a universal input voltage range of 85-264VAC and an output voltage of 15VDC. The power supply is also equipped with a number of features, including overload protection, overtemperature protection, and short circuit protection.

Features:

• Universal input voltage range of 85-264VAC

• Output voltage of 15VDC

• Overload protection

• Overtemperature protection

• Short circuit protection

check out : Mornsun LM75-22B36 AC/DC 75W Enclosed Switching Power Supply

Note:

• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load

• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m

• All index testing methods in this datasheet are based on our company's corporate standards

• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability

• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating

• The output voltage can be adjusted by the ADJ, clockwise to increase

• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units

• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

You may also like