No Ads

Mornsun LM50-23B15 AC/DC 50W Enclosed Switching Power Supply

Product ID: FAERI-02443

Mornsun LM50-23B15 AC/DC 50W Enclosed Switching Power Supply The LM50-23B15 is an enclosed AC/DC converter from Mornsun America, LLC. It has a single output of 15V and can be powered from 85 to 305 VAC or 120 to 430 VDC. The converter is rated for 50W output and has a ripple of less than 1%. It is…

₹1,505.90

Price excludes GST. +18% GST (₹271.06/unit) is added at checkout. Shipping charged separately — based on the order’s quantity & size.

In stock

  • Cash on Delivery available
  • Ships within 24–48 hours
  • Backed by FAERI maker support
No Ads

Product details

Mornsun LM50-23B15 AC/DC 50W Enclosed Switching Power Supply

The LM50-23B15 is an enclosed AC/DC converter from Mornsun America, LLC. It has a single output of 15V and can be powered from 85 to 305 VAC or 120 to 430 VDC. The converter is rated for 50W output and has a ripple of less than 1%. It is also protected against overvoltage, overcurrent, and short circuit.

Features:

• Single output of 15V

• Input voltage range: 85 to 305 VAC or 120 to 430 VDC

• Output power: 50W

• Ripple: <1%

• Overvoltage protection

• Overcurrent protection

• Short circuit protection

check out : Mornsun LM50-22B15 AC/DC 50W Enclosed Switching Power Supply

Note:

• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load

• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m

• All index testing methods in this datasheet are based on our company's corporate standards

• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability

• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating

• The output voltage can be adjusted by the ADJ, clockwise to increase

• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units

• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment