HGLRC C1 Remote Control

The HGLRC C1 Remote Control offers intuitive drone piloting with its ergonomic design and reliable performance. It comes with a comfortable strap for extended use and a convenient dongle for seamless connectivity. With precise control and a user-friendly interface, it enhances the flying experience while ensuring stability and responsiveness during flight.

Features:

1. Built-in 500mw radio frequency module, which can realize stable signal transmission and remote control distance;
2. The operation procedures are extremely simplified, and common operations such as frequency pairing, power adjustment, and joystick calibration can be realized without a screen, and you can get started quickly;
3. Mix and match design of three-stage switch and two-stage switch;
4. It can be equipped with a wireless dongle, no need to connect a USB data cable when practicing the simulator, and the dongle also has USB-A and USB-C dual interfaces;
5. Support the installation of third-party receivers and tuners;

Remote control parameters:

• Built-in ELRS: ELRS 2.4GHZ

• Built-in ELRS refresh rate: 250Hz

• Remote control sensor type: potentiometer sensor

• Antenna: built-in ipex1 generation copper tube antenna

• Working voltage: 6-8.4v DC

• Remote control distance: greater than 500m

• Output interface: TX module NANO bin (crsf protocol) TYPE-C (only charging and firmware flashing) 3.5MM analog trainer port

• Battery: 18650 flat head battery x2 (need to be installed by yourself)

• Charging: TYPE-C charging current 1.2A The charging time is about 3-4 hours

• Remote control channel: 8 channels

• Bluetooth: Bluetooth 4.2

• ELRS firmware upgrade method: WIFI or TYPE-C wire brush

• ELRS firmware version: ELRS 3.0

• ELRS firmware name: DIY devices 2.4 GHz DIY ESP32+ E28 2.4GHz TX

• Weight: 195g (excluding battery)

• Size: 160mmx130mmx50mm (excluding remote control)

Dongle parameters:

• Built-in ELRS Maximum supported frequency: 250hz

• Receiving distance: more than 200m

• Binding method: Quickly power on and off three times to enter binding mode

• Interface: USB TYPE-C+USB TYPE-A double plug

• Working voltage: 5v

• ELRS firmware upgrade method: WIFI or USB plug

• ELRS firmware version: ELRS 3.0

• ELRS Firmware Name: HGLRC 2.4 GHz HGLRC Hermes 2.4GHz RX

• External receiver support protocol: only supports CRSF protocol

• Weight: 9.5g

• Size: 74mmx21mmx12.5mm

Package Includes:

1× remote control
1× remote control hanging strap
1× USB-C data cable

Specification:-

Item Type:

Remote Controller

Sensor Type

potentiometer sensor

Operating Voltage

6-8.4 VDC

Battery

18650 flat head battery

Output Interface

TX module NANO bin (crsf protocol) TYPE-C (only charging and firmware flashing) 3.5MM analog trainer port

Channel

8

Charging Mode

TYPE-C charging current 1.2A The charging time is about 3-4 hours

Shipping Weight
0.5 kg

Shipping Dimensions
22 × 16 × 9 cm