Product details
Botlab Dynamics BotWing F722 Flight Controller (Fully Solderless Design)
BOTWING F7 MANUAL
Dimensions: 40x40mm
Firmware: BetaFlight, iNav
Firmware Target Name: BOTWINGF722
Mounting: 30.5mm x 30.5mm (4mm hole size)
MicroController(MCU): STM32F722
Motors Outputs: 4 Motors and 2 Servos
Gyro (IMU): ICM42688P
Power Input: 3-6S LIPО
On Screen Display (OSD): AT7456E
BlackBox: 32 MB Winbond Blackbox
Buzzer: BZ+ and BZ- pad used for 5V Buzzer
i2C: Supported SDA & SCL pads on front side. Used for magnetometer, sonar etc.
ESC Telemetry UART: UART-4
RSSI: Named as RSSI on the front side
Boot Button: Supported, Press and hold BOOT button and power the FC on at the same time, this will force the FC to enter into DFU Mode, This is used for Firmware Flashing.
Led Pads for LED STRIP: Supported, 5V,GND,DATA pads are present onthe top side.
Weight: 9gm
DJI AIR Unit-6-pin DJI Air Unit Plug: Plug and Play Port
UARTS: UART1 (VTX), UART2(Receiver), UART-3(Camera) UART4 RX (ESC TELEMETRY) UART6(GPS) (5 Sets)
USB Port Type: Type C
4.5V Pads: 3 group of 4.5Vpads is used
5V: 4 group of 5V Pads used in LED Strip, Total 5V pads =6
9V pad: 1 Pad is present
3.3V Pads: 1 Pad is present
Camera Control Pad: Present
Boltlab Dynamics Products
BOTWING F722
Power meets precision with BotWing F722, the elite flight controller for pilots who demand total control. Built with the powerful STM32F722 MCU and ICM42688P gyro, BotWing F722 offers expanded capabilities including 4 motor outputs and 2 servo outputs – ideal for advanced drone configurations. With full compatibility with BetaFlight and iNav, BotWing F722 unlocks powerful mission planning and autonomous navigation, giving you the freedom to design complex flight missions with confidence. Its robust telemetry, 32MB onboard Blackbox, plug-and-play DJI Air Unit port, and flexible 5 UART layout make it the perfect heart for serious builds. Whether you’re racing, exploring, mapping, or executing precision flights, BotWing F722 ensures flawless execution and endless potential- all housed within a clean 30.5×30.5mm mounting holes.
BOTWING F7 MANUAL
Dimensions: 40x40mm
Firmware: BetaFlight, iNav
Firmware Target Name: BOTWINGF722
Mounting: 30.5mm x 30.5mm (4mm hole size)
MicroController(MCU): STM32F722
Motors Outputs: 4 Motors and 2 Servos
Gyro (IMU): ICM42688P
Power Input: 3-6S LIPО
On Screen Display (OSD): AT7456E
BlackBox: 32 MB Winbond Blackbox
Buzzer: BZ+ and BZ- pad used for 5V Buzzer
i2C: Supported SDA & SCL pads on front side. Used for magnetometer, sonar etc.
ESC Telemetry UART: UART-4
RSSI: Named as RSSI on the front side
Boot Button: Supported, Press and hold BOOT button and power the FC on at the same time, this will force the FC to enter into DFU Mode, This is used for Firmware Flashing.
Led Pads for LED STRIP: Supported, 5V,GND,DATA pads are present onthe top side.
Weight: 9gm
DJI AIR Unit-6-pin DJI Air Unit Plug: Plug and Play Port
UARTS: UART1 (VTX), UART2(Receiver), UART-3(Camera) UART4 RX (ESC TELEMETRY) UART6(GPS) (5 Sets)
USB Port Type: Type C
4.5V Pads: 3 group of 4.5Vpads is used
5V: 4 group of 5V Pads used in LED Strip, Total 5V pads =6
9V pad: 1 Pad is present
3.3V Pads: 1 Pad is present
Camera Control Pad: Present
Boltlab Dynamics Products
BOTWING F722
Power meets precision with BotWing F722, the elite flight controller for pilots who demand total control. Built with the powerful STM32F722 MCU and ICM42688P gyro, BotWing F722 offers expanded capabilities including 4 motor outputs and 2 servo outputs – ideal for advanced drone configurations. With full compatibility with BetaFlight and iNav, BotWing F722 unlocks powerful mission planning and autonomous navigation, giving you the freedom to design complex flight missions with confidence. Its robust telemetry, 32MB onboard Blackbox, plug-and-play DJI Air Unit port, and flexible 5 UART layout make it the perfect heart for serious builds. Whether you’re racing, exploring, mapping, or executing precision flights, BotWing F722 ensures flawless execution and endless potential- all housed within a clean 30.5×30.5mm mounting holes.
