BLITZ ATF435 Flight Controller

Specifications MCU: AT32F435RGT7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A Changelog November 6, 2023 : The flight control Gyro was changed from BMI270 to ICM42688. Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemet Packing List 1 x BLITZ ATF435 Flight Controller 1 x FC connector 1 x silicon grommets

BLITZ ATF435 Flight Controller Specifications

• Weight: 7.8g

pads Smartaudio / IRC Tramp VTX protocol supported The flight control Gyro was changed from BMI270 to ICM42688. Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemet Packing List 1 x BLITZ ATF435 Flight Controller 1 x FC connector 1 x silicon grommets

Good to know

For background on this component category, see what a flight controller does in an FPV stack.

Related part

Also see the GEPRC TAKER F722 SE Flight Controller for another option worth comparing.

FAQ

Is this genuine stock? Yes, sourced and sold directly by UAVStore.

Will this fit my build? Check the specifications above against your existing setup before ordering.

Buy the BLITZ ATF435 Flight Controller online in India from UAVStore, with fast domestic shipping.