Alarm Finder Tracer Buzzer for RC Lost Aircraft

The Alarm Finder Tracer Buzzer for RC Lost Aircraft is a simple device that plugs into any servo/Rx port, will detect the loss of the TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX and within few minutes, the alarm will sound. This is a less expensive solution for a very common problem.

How it Works:

RC lost Airplane finder helicopter Parkflyer tracer glider Aircraft Alarm is very easy to use just connect the alarm between the servo and the receiver, i.e.it acts as a servo extension cord. Now, turn on your TX. and you will hear 2 x beep sound. Do not move any of the control stick on the TX or simply turn off the TX. You will hear a continuous beep sound after 5 minute. It will stop once u turn on your TX or move the control stick. If you ignore the continuous beep sound for around 2minutes, the beep sound will change the louder V sound. You need to disconnect the alarm from the receiver in order to switch off the alarm. MAKE SURE THE CORRECT POLARITY BEFORE TURN ON THE TX.

Features:

• Easy to use.

• Let you know where your RC aircraft is when you lose connection with it.

• Particularly useful when the multirotor is out of control,

• Easy to install, simply connect the alarm between the servo and the receiver.

• Most suitable for finding lost Unmanned Vehicle.

• Small and handy module.

• It becomes very noisy when it loses TX signal as long as it is gets disconnected from the receiver

Package Includes:

1× Alarm Finder Tracer Buzzer for RC Lost Aircraft

Specification:-

Color
Green

Voltage Rating (V):
4 to 6

Continuous Drain Current
1-35 mA

Length (mm):
140

Width (mm):
9

Weight (g):
4.5

Shipping Weight
0.05 kg

Shipping Dimensions
4 × 3 × 2 cm